CRANE BOOM OF 40M FABRICATED MIT delivered a 40 m long lattice boom for a Bailey crane on a drilling platform in Thailand. This boom is produced again on the basis of the original drawings from the 80s. The existing boom was...
SLEW RING BEARING GRABBING CRANE REPLACED The slewing ring bearing of approximately 2.25m in diameter for a grab crane with a capacity of 12.5 tons in Rotterdam-Europoort was delivered and assembled by MIT. The slewing ring bearing of the 15-year-old crane was found to...
RENOVATION DECK CRANE OF 1983 IN DUBAI MIT has been working on the renovation of a travelling deck crane on a dredger. After years of intensive use the intention of the customer planned to completely overhaul the crane to be ready for...
MIT OPERATIONALIZES TOWER CRANE An almost 40 year old tower crane at a shipyard in Rotterdam was inspected by MIT. The main purpose of this technical inspection was to determine what repairs and adjustments needed to be done to get the crane...
TUMBLE ARM MADE FOR DREDGING SHIP CRANE Completely according to the original specifications, a tumble arm for a Bailey deck crane aboard a dredger was made and delivered. During work on this tumble arm crane in the port of Suape, Brazil, the poor...
WHEELBOGIES DECK CRANE OVERHAULED MIT has fully overhauled all 4 wheel bogies of a Bailey deck crane on a runway of 90m, on board of a dredger. For this purpose the crane was supported on the port side and the two wheelbogies have...
E-RENOVATION FOR TOWER CRANE MIT replaced the entire electrical installation of a Bailey tower crane of the late '50s. This made the crane, which after some minor changes still was in very good condition, again up to date according to today’s standards....
BOOM OF TOWER CRANE REPAIRED MIT has provided a new profile for the travelling trolley wheels of a tower crane from the 70's along the entire length. MIT turned the boom of the crane back into its original condition again and managed...
