6.3 T OVERHEAD CRANES MOVED AND ADJUSTED MIT was asked for exploration in the possibilities of moving 2 pieces 6.3 T overhead travelling cranes to another location. As a result of re-allocation of available production locations the 2 crane would be no...
CUSTOM MADE MODULAR GANTRY CRANES One of our relationships needed lifting capacity for a limited time. For this MIT developed and manufactured a custom solution that can be reused in all kinds of other forms later. The original request concerned the supply of a...
SLEW RING BEARING FOR DECK CRANE IN PNG MIT has delivered a new slewing ring bearing for Bailey deck crane on a cutter dredger and exchanged it in Papua New Guinea. The slewing ring bearing of the more than 35 year old deck...
SLEW RING BEARING GRABBING CRANE REPLACED The slewing ring bearing of approximately 2.25m in diameter for a grab crane with a capacity of 12.5 tons in Rotterdam-Europoort was delivered and assembled by MIT. The slewing ring bearing of the 15-year-old crane was found to...
REVISION DECK CRANE TROLLEY MIT urgently worked on the revision of the trolley of a deck crane on a suction dredger. We started with an initial check on board in the harbor of IJmuiden and the next day the crane trolley was removed...
SLEW BEARING OF 30-TONS TOWER CRANE REPLACED The slew bearing of approximately 2.75m diameter for a tower crane of 30 tons capacity is delivered and assembled by MIT. Upon inspection the bearing in the lower part of the tower crane construction was found...
WHEELBOGIES DECK CRANE OVERHAULED MIT has fully overhauled all 4 wheel bogies of a Bailey deck crane on a runway of 90m, on board of a dredger. For this purpose the crane was supported on the port side and the two wheelbogies have...
MIT REPAIRS CRANE IN BRAZIL In the port of Suape in Brazil an expert from MIT was flown-in to recover a crane on a dredger. The ship was stopped for the replacement of a crane arm. Our local specialist managed with local assistance...
BOOM OF TOWER CRANE REPAIRED MIT has provided a new profile for the travelling trolley wheels of a tower crane from the 70's along the entire length. MIT turned the boom of the crane back into its original condition again and managed...
REPLACEMENT CRANE TRACK DECK CRANE MIT has completely replaced the crane track of a travelling Bailey deck crane on a dredger. The crane track was also assembled with new toothed racks supplied by MIT. The racks and the crane track of the mid-80s...
