6.3 T OVERHEAD CRANES MOVED AND ADJUSTED MIT was asked for exploration in the possibilities of moving 2 pieces 6.3 T overhead travelling cranes to another location. As a result of re-allocation of available production locations the 2 crane would be no...
CUSTOM MADE MODULAR GANTRY CRANES One of our relationships needed lifting capacity for a limited time. For this MIT developed and manufactured a custom solution that can be reused in all kinds of other forms later. The original request concerned the supply of a...
TRAVELLING UNDERFRAME FOR SHIP LOADER MIT was approached by one of its business contacts for the realization of a travelling underframe for a ship loader arm. For the specific application of the loader arm it had to be placed on a self-propelled...
SLEW RING BEARING GRABBING CRANE REPLACED The slewing ring bearing of approximately 2.25m in diameter for a grab crane with a capacity of 12.5 tons in Rotterdam-Europoort was delivered and assembled by MIT. The slewing ring bearing of the 15-year-old crane was found to...
REPOSITIONING HYDRAULIC TANK DECK CRANE IN SINGAPORE In Singapore we have executed several reconditioning and renovating jobs on a TTS hydraulic deck crane on board a dredger. The most radical was the relocation of the hydraulic tank from the bottom of the crane...
RENOVATION DECK CRANE OF 1983 IN DUBAI MIT has been working on the renovation of a travelling deck crane on a dredger. After years of intensive use the intention of the customer planned to completely overhaul the crane to be ready for...
ADAPTIONS MADE TO DECK CRANE A new cabin and putting a new jib head on the boom, were the most eye-catching aspects of a partial overhaul of a Dreggen deck crane for one of our clients. MIT has delivered a more-or-less standard crane...
RENOVATION OF THE SCHELDE CRANE The Schelde Crane is being renovated and restored completely by MIT and was returned to the former Marine dock in Vlissingen. Following the City Plan Renovation Schelde Crane MIT has prepared for the Municipality, mayor and aldermen have...
MIT RENOVATES 60 YEAR OLD CRANE BEAM WITH TROLLEY A crane installation with a travelling crab in an old factory in Enschede has been disassembled, completely renovated and reinserted by MIT. The former textile factory in Enschede, Tetem, had a 2-ton crane installation...
SLEW BEARING OF 30-TONS TOWER CRANE REPLACED The slew bearing of approximately 2.75m diameter for a tower crane of 30 tons capacity is delivered and assembled by MIT. Upon inspection the bearing in the lower part of the tower crane construction was found...
