6.3 T OVERHEAD CRANES MOVED AND ADJUSTED MIT was asked for exploration in the possibilities of moving 2 pieces 6.3 T overhead travelling cranes to another location. As a result of re-allocation of available production locations the 2 crane would be no...
CRANE BOOM OF 40M FABRICATED MIT delivered a 40 m long lattice boom for a Bailey crane on a drilling platform in Thailand. This boom is produced again on the basis of the original drawings from the 80s. The existing boom was...
TRAVELLING UNDERFRAME FOR SHIP LOADER MIT was approached by one of its business contacts for the realization of a travelling underframe for a ship loader arm. For the specific application of the loader arm it had to be placed on a self-propelled...
REPOSITIONING HYDRAULIC TANK DECK CRANE IN SINGAPORE In Singapore we have executed several reconditioning and renovating jobs on a TTS hydraulic deck crane on board a dredger. The most radical was the relocation of the hydraulic tank from the bottom of the crane...
REVISION DECK CRANE TROLLEY MIT urgently worked on the revision of the trolley of a deck crane on a suction dredger. We started with an initial check on board in the harbor of IJmuiden and the next day the crane trolley was removed...
RENOVATION DECK CRANE OF 1983 IN DUBAI MIT has been working on the renovation of a travelling deck crane on a dredger. After years of intensive use the intention of the customer planned to completely overhaul the crane to be ready for...
ADAPTIONS MADE TO DECK CRANE A new cabin and putting a new jib head on the boom, were the most eye-catching aspects of a partial overhaul of a Dreggen deck crane for one of our clients. MIT has delivered a more-or-less standard crane...
MIT OPERATIONALIZES TOWER CRANE An almost 40 year old tower crane at a shipyard in Rotterdam was inspected by MIT. The main purpose of this technical inspection was to determine what repairs and adjustments needed to be done to get the crane...
RENOVATION OF THE SCHELDE CRANE The Schelde Crane is being renovated and restored completely by MIT and was returned to the former Marine dock in Vlissingen. Following the City Plan Renovation Schelde Crane MIT has prepared for the Municipality, mayor and aldermen have...
SLEW BEARING OF 30-TONS TOWER CRANE REPLACED The slew bearing of approximately 2.75m diameter for a tower crane of 30 tons capacity is delivered and assembled by MIT. Upon inspection the bearing in the lower part of the tower crane construction was found...
